ProTight™
MB-RAD and B-RAD-S with process control software
Radial Torque Tools B.V. is proud to announce its cooperation with ProSuite®, the software developing company for ProTight™ bolting process control.
As a result, the MB-RAD and B-RAD-S works with ProTight™, a combination that provides complete control over the tightening process.
The MB-RAD and B-RAD-S in combination with ProTight™ instructs the user per bolt what the prescribed procedure is and what tightening torque and/or angular rotation is required. This ensures that each bolt is at the prescribed torque, that bolts are torqued in the correct sequence, and that no bolts can be ‘missed’. In addition, every action is logged in the system so that everything can be found and checked afterwards.
Non-impacting
Safe & Reliable
According to European standards
Lithium-ion battery
Bluetooth connectivity
Software data exchange
Torque + angle function
Open protocol
The MB-RAD and B-RAD-S series is able to connect with ProTight™ by means of enabling the open protocol option in the tool menu.
With this option enabled, the MB-RAD and B-RAD-S can exchange data with the ProTight™ program. The ProTight™ software runs on a laptop or Windows equipped tablet (connects through Wi-Fi or LAN). After successful connection of the system, a bolting job can be configured by setting torque/angle pre-sets in the MB-RAD and B-RAD-S. In the ProTight™ program, it is possible to configure the bolting sequence as well as the barcode and to specify the operator For “live” viewing and data logging, a connection to the customers’ network can be configured. All actions are also stored in the customer’s ERP system so that it is always possible to check afterwards how the work has been carried out.
The ProTight™ system gives the user precise instructions on how and in what order to tighten the various connections to the MB-RAD and B-RAD-S so that all bolts are handled according to the prescribed procedure.
Error free operation
The ProTight™ system ensures that the operator will be precisely instructed how to use the MB-RAD and B-RAD-S so that all bolts are tightened according to procedure and each job can be logged live in the customers’ ERP system for 100% traceability.
ProTight™ actively controls the MB-RAD and B-RAD-S based on the scanned barcode, and subsequently engages the correct torque preset in the MB-RAD and B-RAD-S. It then visually indicates the required actions and bolting sequence on screen and counts whether all bolts have been tightened.
During the bolting process, the operator is visually and audibly updated on the status of the job in progress.
If bolts have been skipped or have been tightened twice, ProTight™ detects this and forces the operator to take action.
If an error alarm is ignored by the operator, the job will not be completed correctly and the printed sticker will indicate an incomplete job.
If later this sticker is scanned again, the system will indicate which bolt still has to be tightened before it will print the OK sticker. In this way the system is still flexible and all results are directly visible with the sticker on the final product. Without scanning a correct job, the MB-RAD and B-RAD-S remain disabled by the program so that mistakes are prevented.
In this way the system is still flexible and all results are directly visible with the sticker on the final product. Without scanning a correct job, the MB-RAD and B-RAD-S remain disabled by the program so that mistakes are prevented.
The end result is that there is 100% certainty that the job has been done correctly, and with the clear visual instruction, a non-trained operator can learn the job very quickly.
The functional ProTight™ system consists of the following components:
- MB-RAD / B-RAD-S – all torque models, with the latest software update
- ProTight™ software
- Barcode scanner, label printer, USB Hub, Stack light and Bluetooth receiver (can be delivered in a case).
Our other products
Digital Manual Wrenches
Prefer to use a manual torque wrench? Check out our digital hand torque wrenches from TrackWrench®.
Our TrackWrench® digital hand torque wrenches provide precision and control for torqueing your workpieces. With an easy-to-operate digital display, you can select the correct torque settings and adjust the wrench to meet the specific requirements of your project.
Spindle Wrenches
Need to open and close valves? Check out our solutions from Modec for valves. Our torque wrenches are specially designed for this application and guarantee smooth and precise operation. View our products for the right solution for your application.
Offset multipliers
Lack of space above the bolt and nut? RAD Torque Systems has a the Offset multipliers for this. Our innovative design provides an efficient solution for securing nuts and bolts in hard to reach places.
Choose a RAD Torque Wrench
Battery
30 – 15.000 Nm
RAD battery-operated torque wrenches in the B-RAD series are unsurpassed thanks to their high torque capacity and lack of cables and hoses.
Electric
60 – 16.500 Nm
RAD electric torque wrenches are lightweight and compact torque wrenches suitable for heavy industrial use.
Pneumatic
30 – 15.000 Nm
RAD pneumatic torque wrenches are indestructible powerhouses. As well as being extremely fast and compact.
Calibration
200 – 24.400 Nm
RAD offers various transducer based torque wrenches for accurate torque measurement complying to the ISO 17025 standard.